Ok, I said that the powder room post was the last home improvement post. But I forgot I wanted to tell you about IndustrialEx in Colorado Springs (there’s also one in Denver).
We had some vintage metal cabinets in our kitchen and wanted to fix them up and reuse them in our renovation. There is lots of info online about how to deal with old metal cabinets, from stripping and painting them yourself, to taking them to an auto body place to be painted, to powder coating.
I was more familiar with powder coating than with any of the other options, so even tho some people said that the blasting they need to do to strip them (the metal has to be completely bare, raw metal for powder coating to work unlike other kinds of coating) might warp or dent the metal, we decided to try it. IndustrialEx used a gentle material in the blasting process (bead blasting?) and we did not have any problem with warping. We did have a few small dings in the metal, but I’m not sure if that was from the blasting or if they were there before. Later someone told me that we should have looked at them once they were stripped and had the dings filled and repaired before the powder coating. I don’t know if they really could have done that, tho because the repair material would have also had to be metal. But the dings weren’t huge and we were selling the house so I just ignored them.
There are lots of powder coating colors and several different finishes, we chose a simple white in a semi-gloss finish. If we were staying in the house I would have picked something fun like red in a high gloss finish. But with powder coating, since it’s baked on, it’s permanent, it can’t be blasted off or removed or re-powder coated (altho it can probably be painted), so we figured white was pretty safe.
We had to take the cabinets out and take all the hardware off (including the little rubber wheels on the drawers, which we were very careful not to misplace!) before the powder coating, then put everything back on after.
We were so happy with how the cabinets turned out that we took all our heater vents to be done, too.
We were really happy with the powder coating and are looking around for more stuff to do it to!